COMBUSTION BOOSTER
Smog Doctor VB01 has not only been developed to clean injectors, it has also being designed to survive the combustion process, enabling it to clean the exhaust valves, the fins of the turbo charger, EGR valve and the DPF or CRT particulate filter.
A) Injection
You can expect emissions reductions by up to half when driving for 15 minutes with VB01 added to 10 liters of fuel (car) or to 50 liters of fuel (truck or bus). VB01 transforms this fuel into a power cleaner and the cleaning will continue until all the fuel is consumed. VB01 doesn’t contain Cetane improvers, and it contains exclusive cleaners enriched with EP lubricants.
B) Combustion
Some of the components of VB01 interacts directly with carbon deposits in the combustion chamber.
C) Exhaust Valves
Before entering the exhaust, the vapors which survived the combustion will wet the stems and seats of the exhaust valves, and thanks to the local high temperatures a chemical reaction will take place between deposits and vapors eliminating the deposits.
1000ml
300ml
D) EGR Valve & VGT Turbo
Part of VB01 enters the EGR valve and turbocharger fins to clean the carbon deposits. The malfunction warning light of the EGR valve or the VGT turbocharger will disappear within 50 km of driving.
E) DPF / FAP / CRT filter
VB01 will reach DPF, FAP or CRT filters to soften the sediments and helps filter regeneration. Best of all, VB01 will dramatically reduce black smoke over a long period of time, reducing the frequency of the regeneration process. Less regeneration means less diesel fuel going into engine oil and longer particulate filter life.
- Motorcycles and scooters: 150ml for 5-15L of gasoline
- Passenger car, van, SUV: 300ml for gasoline 5-65L / diesel 0-65L
- Trucks, buses and industrial engines: 900ml for 0-400L of diesel
* The smaller the amount of fuel, the stronger the cleaning power. * For very serious problems, double the capacity.
FAQ About VB01
How can I restore the acceleration?
By cleaning/optimizing the injection with VB01, along with by cleaning/restoring the compression with VB35, cleaning/reopening the air intake with VB45, and cleaning/lightening the turbine in the exhaust with VB45.
Can I use VB01 on biodiesel engines?
Yes, VB01 is specially formulated to be used in any kind of gasoline and diesel engines including biodiesel engines.
How can I solve the problem of black smoke?
Normally the problems are caused by deposits, add VB01 into the fuel tank, then VB35 into the engine oil and spray VB45 inside the air intake. This will significantly reduce black smoke.
Which cleaner is recommended for a carburetor?
For the fuel circuit: Add VB01 into the gasoline tank, and within 20km of driving you will notice the results.
For the air circuit: Spray VB45 into the throttle keeping the engine accelerated.
How can I clean the catalytic converter?
By optimizing/cleaning the injection with VB01 by adding it into the fuel tank, along with VB35 by adding it into the engine oil to optimize/clean the compression and VB45 by spraying it into the air intake.
How can I clean the combustion chamber?
With VB01, VB35 and VB45, they don’t burn easily, and thus have more time to dissolve the deposits in the combustions chambers and furthermore to also clean the components of the exhaust.
How can I clean the cooler of the EGR-Valve?
Mounted: Add VB01 into the fuel tank, VB35 into the engine oil and VB45 sprayed into the air intake.
Dismounted or accessible: Spray VB45 inside the cooler.
How can I clean the EGR-Valve?
Mounted: Add VB01 into the fuel tank, VB35 into the engine oil and VB45 sprayed into the EGR Valve.
Dismounted or accessible: Spray VB45 directly on the deposits inside the valve.
Do I need a specific product for FSI engines?
With Smog Doctor, NO. Our products VB01, VB35 and VB45 were specially designed to be used in all kinds of gasoline, diesel, LPG, and Methane engines.
Are Smog Doctor products compatible with seals and gaskets?
VB01 and VB35 are 100% compatible with the Viton-seals and gaskets of the fuel injection systems from any kind of gasoline, diesel, LPG, and Methane engines. VB35 is 100% compatible with seals and gaskets of all oil systems.
Are Smog Doctor products recommended for gasoline engines?
VB01 is compatible with all kinds of gasoline engines, VB35 with almost all, except for carburetor engines.
With which product I can clean the injection?
With VB01 you can clean deeply, but you don’t eliminate water/moisture from the system. With VB35 you keep the system clean, and you bind water/moisture to the fuel and eliminate it through combustion.
What should I do in case of engine knocking?
Clean the combustion chambers with VB01 added to the fuel tank and VB45 sprayed into the air intake.
Which products can I use on a moped or a scooter?
150ml of VB01 added to 5 liters of gasoline will restore a lot of the performance. 300ml of VB35 added to the engine oil will restore even more performance.
Can I use Smog Doctor products on old vehicles?
Yes, can add VB01 into the fuel tank of any kind of vehicle. Also, can add VB35 into the engine oil, with exceptions when the vehicle has worn piston rings and/or the cylinders are oval.
How can I restore the power of the engine?
By optimizing/cleaning the injection with VB01 by adding it into the fuel tank, along with VB35 by adding it into the engine oil to optimize/clean the compression and VB45 by spraying it into the air intake to boost the VGT-Turbine.
With which Smog Doctor product can I clean the fuel pump?
With VB01 and VB35 both together. VB35 eliminates water/moisture from the fuel system and dissolve deposits, VB01 won’t eliminate water/moisture, but is stronger on dissolving and removing the deposits.
Which product is most effective on soot deposits?
VB45 is recommended to directly eliminate the soot deposits inside the EGR-Valve, the VGT-Turbo Charger, the particulate filter FAP/DPF and inside the converter. The joined actions of VB01 (by adding it into the fuel tank), VB35 (by adding it into the engine oil), and VB45 (by spraying it inside the intake), will eliminate the soot inside the EGR-Valve, VGT-Turbo, FAP/DPF and inside the converter.
How can I eliminate engine choking?
By optimizing/cleaning the injection with VB01 by adding it into the fuel tank, along with VB35 by adding it into the engine oil to optimize/clean the compression and VB45 by spraying it into the air intake to boost the VGT-Turbine
What should I do if the engine does not start-up easily?
Gasoline and diesel engines: Clean the pump and injectors or carburetors with VB01 added to the fuel tank.
LPG engines: Clean the injection with VB35 injected into the gas tank.
Methane engines: Clean the injectors with VB35 Injected into the injector rail.
How can I restore the maximum speed?
By optimizing/cleaning the injection with VB01 by adding it into the fuel tank, along with VB35 by adding it into the engine oil to optimize/clean the compression and VB45 by spraying it into the air intake to boost the Turbo Charger.
How can I obtain the maximum torque from my engine?
By optimizing/cleaning the injection with VB01 by adding it into the fuel tank, along with VB35 by adding it into the engine oil to optimize/clean the compression and VB45 by spraying it into the air intake to boost the Turbo Charger.
What is the recommended dosage for a bus?
Diesel Fuel: Add 900ml of VB01 into the fuel tank.
Oil: 900ml of VB35 into the engine oil.
Repeat once a year or every 100,000 km (60,000 miles)
What is the recommended dosage for HGV (Heavy Goods Vehicle/Truck)?
Diesel Fuel: Add 900ml of VB01 into the fuel tank.
Oil: 900ml of VB35 into the engine oil.
Repeat once a year or every 100,000 km (60,000 miles)
What is the recommended dosage for a tractor?
Fuel: Add 900ml of VB01 into the fuel tank.
Oil: 900ml of VB35 into the engine oil.
Repeat once a year or every 100,000 km (60,000 miles)
How can I clean the turbo charger?
Mounted: By adding VB01 into the fuel tank, VB35 into the engine oil and spraying VB45 into the air intake, it will clean the fins of the turbine wheel in the intake and the compressor wheel in the intake.
Dismounted or accessible: Spray VB45 directly inside the turbine.
How can I clean the seats and stems of the valves?
Intake valves of gasoline and diesel engines with VB45 sprayed into the intake. Intake valves of gasoline engines with direct injection, first add VB01 into the fuel tank and then spray VB45 into the intake. Outlet valves of gasoline and diesel engine with VB01 added to the fuel tank and VB45 sprayed into the intake.
How can I clean the seats and stems of the outlet valves?
By adding VB01 into the gasoline of diesel engine fuel tank and spraying VB45 into the air intake.
How can I clean the turbine wheel of the turbo charger?
Mounted: Adding VB01 into the gasoline or diesel fuel tank and spraying VB45 into the air intake.
Dismounted: Spraying VB45 directly on the deposits inside the turbo charger.