VB02 can be used in all lubrication and hydraulic systems, it has excellent sludge decomposition performance. It restores rubber and seals (O-rings) while in use. It also contains extreme pressure additives to protect parts in friction areas.

​

A) Lubrication cleaning – Engine oil flush

Use 300ml of VB02 for every 5 liters of engine oil. If there is a lot of sludge or oil is leaking from the rubber seal, double the dosage. After flushing at idle for at least 30 minutes, change the engine oil and filter. It is highly recommended to keep the engine running at low RPM to clean the hydraulic valve lifter or to solve the piston ring sticking.

​

B) Cleaning gearbox, abs & power steering

Use 300ml of VB02 for every 4 liters of oil/fluid. (If the total amount of oil/fluid is 2L, use 150ml). Drive the vehicle for at least 10 minutes and use all gears, then proceed to drain and change the oil.

​

C) Cleaning transmission

Add only 50% of VB02 to existing oil. Drive the vehicle at least 30 minutes, use all gears, then proceed to change the oil and filter. Due to the structure of the automatic transmission, even if VB02 remains inside, there won't be any problem with the transmission.